Power Transmission Solutions for Marine Vessels
Brakes
Main Drive
Propulsion
Propulsion, Cranes, Pumps, Jackups Winches for Workboats
Twiflex

VH Series Caliper Disc Brake

The Twiflex VH disc brake caliper is comprised of two modules secured between U-shaped top and bottom mounting plates by tie rods.

Typically one or two calipers are used per disc, but the number may be increased depending on disc size. The brakes may be positioned at any angle around the periphery, but ideally mounted horizontally.

Minimum disc diameter is 1000mm with no maximum except for practical limitations. The standard caliper can accommodate disc thicknesses from 38mm to 50mm - consult Twiflex for discs thicker than 50mm.

A tandem caliper arrangement is available sharing a common, central, mounting plate; minimum disc diameter is 2000mm.

tf-vh-caliper-brake
Features
    • Hydraulically-applied,spring-released caliper disk brake can be used for a large variety of propulsion systems
    • Easy friction pad replacement and simple mounting,either singly or in groups
    • Heavy duty base mounting caliper with spring retraction of pads and manual adjustment for pad wear
    • Special tandem VH calipers with double torque capacity are available
Videos
    Application Profiles
        Twiflex
        9 Briar Road, Twickenham
        Middlesex TW2 6RB – England
        Phone:+44 (0) 20 8894 1161
        Fax:+44 (0) 20 8755 5601
        Twiflex (USA)
        2800 Fisher Road
        Wichita Falls, TX 76302
        Toll Free:844-723-3483
        Phone:940-723-3483
        Fax:940-723-3436